[{"data":1,"prerenderedAt":-1},["ShallowReactive",2],{"$fGI9RmHOYRNCIU9vc4S4Mh5zzIRxVpGXJxOg2pa2bsEs":3,"g5a-ex:juniper\u002Fqfx5100-96s@*":94,"g5a-family:juniper\u002Fqfx5100-96s":96},{"success":4,"data":5},true,{"product":6,"versions":14,"topVulnerabilitiesByEpss":15,"kevVulnerabilities":71,"seoMetadata":72,"meta":91},{"vendorName":7,"productName":8,"versionCount":9,"totalCves":10,"kevCount":9,"lastCveUpdate":11,"versions":12,"description":13},"juniper","qfx5100-96s",0,10,"2024-01-12",[],"Qfx5100-96s by Juniper is a technology product and 10 known security vulnerabilities. Get comprehensive security analysis, vulnerability tracking, and threat intelligence for this product.",[],[16,25,32,38,42,47,52,57,62,66],{"cveId":17,"description":18,"publishedDate":19,"cvssScore":20,"cvssVersion":21,"severity":22,"isKev":23,"epssScore":24},"CVE-2021-31361","An Improper Check for Unusual or Exceptional Conditions vulnerability combined with Improper Handling of Exceptional Conditions in Juniper Networks Junos OS on QFX Series and PTX Series allows an unauthenticated network based attacker to cause increased FPC CPU utilization by sending specific IP packets which are being VXLAN encapsulated leading to a partial Denial of Service (DoS). Continued receipted of these specific traffic will create a sustained Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS on QFX Series: All versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R2-S13, 17.4R3-S4; 18.1 versions prior to 18.1R3-S12; 18.2 versions prior to 18.2R2-S8, 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R1-S8, 18.4R2-S7, 18.4R3-S7; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R2-S3, 19.4R3-S1; 20.1 versions prior to 20.1R2, 20.1R3; 20.2 versions prior to 20.2R2, 20.2R3; 20.3 versions prior to 20.3R1-S1, 20.3R2. Juniper Networks Junos OS on PTX Series: All versions prior to 18.4R3-S9; 19.1 versions prior to 19.1R3-S6; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S6, 19.3R3-S3; 19.4 versions prior to 19.4R1-S4, 19.4R3-S5; 20.1 versions prior to 20.1R2-S2, 20.1R3; 20.2 versions prior to 20.2R3-S1; 20.3 versions prior to 20.3R2-S1, 20.3R3; 20.4 versions prior to 20.4R2-S1, 20.4R3; 21.1 versions prior to 21.1R1-S1, 21.1R2.","2021-10-19",5.3,"v3.1","Medium",false,0.01048,{"cveId":26,"description":27,"publishedDate":28,"cvssScore":29,"cvssVersion":21,"severity":30,"isKev":23,"epssScore":31},"CVE-2021-0285","An uncontrolled resource consumption vulnerability in Juniper Networks Junos OS on QFX5000 Series and EX4600 Series switches allows an attacker sending large amounts of legitimate traffic destined to the device to cause Interchassis Control Protocol (ICCP) interruptions, leading to an unstable control connection between the Multi-Chassis Link Aggregation Group (MC-LAG) nodes which can in turn lead to traffic loss. Continued receipt of this amount of traffic will create a sustained Denial of Service (DoS) condition. An indication that the system could be impacted by this issue is the following log message: \"DDOS_PROTOCOL_VIOLATION_SET: Warning: Host-bound traffic for protocol\u002Fexception LOCALNH:aggregate exceeded its allowed bandwidth at fpc \u003Cfpc number> for \u003Cn> times, started at \u003Ctimestamp>\" This issue affects Juniper Networks Junos OS on QFX5000 Series and EX4600 Series: 15.1 versions prior to 15.1R7-S9; 17.3 versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R2-S13, 17.4R3-S5; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R2-S8, 18.4R3-S7; 19.1 versions prior to 19.1R3-S5; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R2-S6, 19.3R3-S2; 19.4 versions prior to 19.4R1-S4, 19.4R2-S4, 19.4R3-S2; 20.1 versions prior to 20.1R2-S2, 20.1R3; 20.2 versions prior to 20.2R2-S3, 20.2R3; 20.3 versions prior to 20.3R2; 20.4 versions prior to 20.4R1-S1, 20.4R2.","2021-07-15",7.5,"High",0.00961,{"cveId":33,"description":34,"publishedDate":35,"cvssScore":36,"cvssVersion":21,"severity":22,"isKev":23,"epssScore":37},"CVE-2021-0234","Due to an improper Initialization vulnerability on Juniper Networks Junos OS QFX5100-96S devices with QFX 5e Series image installed, ddos-protection configuration changes will not take effect beyond the default DDoS (Distributed Denial of Service) settings when configured from the CLI. The DDoS protection (jddosd) daemon allows the device to continue to function while protecting the packet forwarding engine (PFE) during the DDoS attack. When this issue occurs, the default DDoS settings within the PFE apply, as CPU bound packets will be throttled and dropped in the PFE when the limits are exceeded. To check if the device has this issue, the administrator can execute the following command to monitor the status of DDoS protection: user@device> show ddos-protection protocols error: the ddos-protection subsystem is not running This issue affects only QFX5100-96S devices. No other products or platforms are affected by this issue. This issue affects: Juniper Networks Junos OS on QFX5100-96S: 17.3 versions prior to 17.3R3-S10; 17.4 versions prior to 17.4R3-S4; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R3-S3; 18.3 versions prior to 18.3R3-S2; 18.4 versions prior to 18.4R2-S4, 18.4R3-S1; 19.1 versions prior to 19.1R3, 19.1R3-S4; 19.2 versions prior to 19.2R2; 19.3 versions prior to 19.3R3; 19.4 versions prior to 19.4R2;","2021-04-22",5.8,0.00946,{"cveId":39,"description":40,"publishedDate":11,"cvssScore":29,"cvssVersion":21,"severity":30,"isKev":23,"epssScore":41},"CVE-2024-21595","\nAn Improper Validation of Syntactic Correctness of Input vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows a network-based, unauthenticated attacker to cause a Denial of Service (DoS).\n\nIf an attacker sends high rate of specific ICMP traffic to a device with VXLAN configured, this causes a deadlock of the PFE and results in the device becoming unresponsive. A manual restart will be required to recover the device.\n\nThis issue only affects EX4100, EX4400, EX4600, QFX5000 Series devices.\n\nThis issue affects:\n\nJuniper Networks Junos OS\n\n\n\n  *  21.4R3 versions earlier than 21.4R3-S4;\n  *  22.1R3 versions earlier than 22.1R3-S3;\n  *  22.2R2 versions earlier than 22.2R3-S1;\n  *  22.3 versions earlier than 22.3R2-S2, 22.3R3;\n  *  22.4 versions earlier than 22.4R2;\n  *  23.1 versions earlier than 23.1R2.\n\n\n\n\n\n\n",0.00538,{"cveId":43,"description":44,"publishedDate":19,"cvssScore":45,"cvssVersion":21,"severity":22,"isKev":23,"epssScore":46},"CVE-2021-31370","An Incomplete List of Disallowed Inputs vulnerability in Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on QFX5000 Series and EX4600 Series allows an adjacent unauthenticated attacker which sends a high rate of specific multicast traffic to cause control traffic received from the network to be dropped. This will impact control protocols (including but not limited to routing-protocols) and lead to a Denial of Service (DoS). Continued receipt of this specific multicast traffic will create a sustained Denial of Service (DoS) condition. This issue affects Juniper Networks Junos OS on QFX5000 and EX4600 Series: All versions prior to 17.3R3-S12; 17.4 versions prior to 17.4R3-S5; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R3-S9; 19.1 versions prior to 19.1R3-S6; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S6, 19.3R3-S3; 19.4 versions prior to 19.4R1-S4, 19.4R3-S3; 20.1 versions prior to 20.1R2-S2, 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R2-S2, 20.4R3; 21.1 versions prior to 21.1R1-S1, 21.1R2.",6.5,0.00422,{"cveId":48,"description":49,"publishedDate":50,"cvssScore":45,"cvssVersion":21,"severity":22,"isKev":23,"epssScore":51},"CVE-2022-22210","A NULL Pointer Dereference vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on QFX5000 Series and MX Series allows an unauthenticated adjacent attacker to cause a Denial of Service (DoS). On QFX5K Series and MX Series, when the PFE receives a specific VxLAN packet the Layer 2 Address Learning Manager (L2ALM) process will crash leading to an FPC reboot. Continued receipt of this specific packet will create a sustained Denial of Service (DoS) condition. This issue affects Juniper Networks Junos OS on QFX5000 Series, MX Series: 20.3 versions prior to 20.3R3-S3; 20.4 versions prior to 20.4R3-S2; 21.2 versions prior to 21.2R2-S1. This issue does not affect Juniper Networks Junos OS: All versions prior to 20.3R1; 21.1 version 21.1R1 and later versions.","2022-07-20",0.00321,{"cveId":53,"description":54,"publishedDate":55,"cvssScore":45,"cvssVersion":21,"severity":22,"isKev":23,"epssScore":56},"CVE-2023-22405","An Improper Preservation of Consistency Between Independent Representations of Shared State vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows an adjacent, unauthenticated attacker to cause a Denial of Service (DoS) to device due to out of resources. When a device is configured with \"service-provider\u002FSP style\" switching, and mac-limiting is configured on an Aggregated Ethernet (ae) interface, and then a PFE is restarted or the device is rebooted, mac-limiting doesn't work anymore. Please note that the issue might not be apparent as traffic will continue to flow through the device although the mac table and respective logs will indicate that mac limit is reached. Functionality can be restored by removing and re-adding the MAC limit configuration. This issue affects Juniper Networks Junos OS on QFX5k Series, EX46xx Series: All versions prior to 20.2R3-S5; 20.3 versions prior to 20.3R3-S5; 20.4 versions prior to 20.4R3-S4; 21.1 versions prior to 21.1R3-S3; 21.2 versions prior to 21.2R3-S1; 21.3 versions prior to 21.3R3 on; 21.4 versions prior to 21.4R3 on; 22.1 versions prior to 22.1R2 on.","2023-01-13",0.00309,{"cveId":58,"description":59,"publishedDate":60,"cvssScore":45,"cvssVersion":21,"severity":22,"isKev":23,"epssScore":61},"CVE-2023-44203","\nAn Improper Check or Handling of Exceptional Conditions vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on QFX5000 Series, EX2300, EX3400, EX4100, EX4400 and EX4600 allows a adjacent attacker to send specific traffic, which leads to packet flooding, resulting in a Denial of Service (DoS).\n\nWhen a specific IGMP packet is received in an isolated VLAN, it is duplicated to all other ports under the primary VLAN, which causes a flood.\n\nThis issue affects QFX5000 series, EX2300, EX3400, EX4100, EX4400 and EX4600 platforms only.\n\nThis issue affects Juniper Junos OS on on QFX5000 Series, EX2300, EX3400, EX4100, EX4400 and EX4600:\n\n\n\n  *  All versions prior to 20.4R3-S5;\n  *  21.1 versions prior to 21.1R3-S4;\n  *  21.2 versions prior to 21.2R3-S3;\n  *  21.3 versions prior to 21.3R3-S5;\n  *  21.4 versions prior to 21.4R3-S2;\n  *  22.1 versions prior to 22.1R3;\n  *  22.2 versions prior to 22.2R3;\n  *  22.3 versions prior to 22.3R2.\n\n\n\n\n\n\n","2023-10-13",0.00303,{"cveId":63,"description":64,"publishedDate":28,"cvssScore":20,"cvssVersion":21,"severity":22,"isKev":23,"epssScore":65},"CVE-2021-0289","When user-defined ARP Policer is configured and applied on one or more Aggregated Ethernet (AE) interface units, a Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability between the Device Control Daemon (DCD) and firewall process (dfwd) daemons of Juniper Networks Junos OS allows an attacker to bypass the user-defined ARP Policer. In this particular case the User ARP policer is replaced with default ARP policer. To review the desired ARP Policers and actual state one can run the command \"show interfaces \u003C> extensive\" and review the output. See further details below. An example output is: show interfaces extensive | match policer Policer: Input: __default_arp_policer__ \u003C\u003C\u003C incorrect if user ARP Policer was applied on an AE interface and the default ARP Policer is displayed Policer: Input: jtac-arp-ae5.317-inet-arp \u003C\u003C\u003C correct if user ARP Policer was applied on an AE interface For all platforms, except SRX Series: This issue affects Juniper Networks Junos OS: All versions 5.6R1 and all later versions prior to 18.4 versions prior to 18.4R2-S9, 18.4R3-S9 with the exception of 15.1 versions 15.1R7-S10 and later versions; 19.4 versions prior to 19.4R3-S3; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R3-S2; 20.3 version 20.3R1 and later versions; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2; This issue does not affect Juniper Networks Junos OS versions prior to 5.6R1. On SRX Series this issue affects Juniper Networks Junos OS: 18.4 versions prior to 18.4R2-S9, 18.4R3-S9; 19.4 versions prior to 19.4R3-S4; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R3-S2; 20.3 version 20.3R1 and later versions; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2. This issue does not affect 18.4 versions prior to 18.4R1 on SRX Series. This issue does not affect Junos OS Evolved.",0.00261,{"cveId":67,"description":68,"publishedDate":69,"cvssScore":20,"cvssVersion":21,"severity":22,"isKev":23,"epssScore":70},"CVE-2023-28984","A Use After Free vulnerability in the Layer 2 Address Learning Manager (l2alm) of Juniper Networks Junos OS on QFX Series allows an adjacent attacker to cause the Packet Forwarding Engine to crash and restart, leading to a Denial of Service (DoS). The PFE may crash when a lot of MAC learning and aging happens, but due to a Race Condition (Concurrent Execution using Shared Resource with Improper Synchronization) that is outside the attackers direct control. This issue affects: Juniper Networks Junos OS versions prior to 19.4R3-S10 on QFX Series; 20.2 versions prior to 20.2R3-S7 on QFX Series; 20.3 versions prior to 20.3R3-S6 on QFX Series; 20.4 versions prior to 20.4R3-S5 on QFX Series; 21.1 versions prior to 21.1R3-S4 on QFX Series; 21.2 versions prior to 21.2R3-S3 on QFX Series; 21.3 versions prior to 21.3R3-S3 on QFX Series; 21.4 versions prior to 21.4R3 on QFX Series; 22.1 versions prior to 22.1R3 on QFX Series; 22.2 versions prior to 22.2R2 on QFX Series.","2023-04-17",0.00212,[],{"title":73,"metaDescription":74,"keywords":75,"structuredData":76},"Qfx5100-96s by Juniper - Security Vulnerabilities & Analysis | Precursor Intelligence","Comprehensive security analysis for Qfx5100-96s by Juniper with 10 tracked vulnerabilities. Real-time threat intelligence, CVE tracking, and security recommendations.","Qfx5100-96s vulnerabilities, Qfx5100-96s security, Qfx5100-96s CVE, Juniper Qfx5100-96s, Qfx5100-96s threat intelligence, Juniper security, product security analysis, cybersecurity threats, vulnerability management, CVE tracking",{"@context":77,"@type":78,"name":79,"description":74,"url":80,"manufacturer":81,"applicationCategory":85,"softwareVersion":86,"mainEntity":87},"https:\u002F\u002Fschema.org","SoftwareApplication","Qfx5100-96s","https:\u002F\u002Fprecursorintelligence.com\u002Fvulnerabilities\u002Ftechnologies\u002Fvendors\u002Fjuniper\u002Fqfx5100-96s",{"@type":82,"name":83,"url":84},"Organization","Juniper","https:\u002F\u002Fprecursorintelligence.com\u002Fvendors\u002Fjuniper","Security Software","Multiple versions",{"@type":88,"name":89,"description":90,"vulnerabilityCount":10,"dateModified":11},"SecurityVulnerability","Qfx5100-96s Security Vulnerabilities","Security vulnerabilities affecting Qfx5100-96s by Juniper",{"totalVersions":9,"totalVulnerabilities":10,"kevVulnerabilities":9,"lastUpdated":11,"generatedAt":92,"apiVersion":93},"2026-10-19T00:54:38.128Z","3.0",{"rows":95,"total":9,"capped":23,"failed":9},[],[]]